Linear Actuators U10

Linear actuators for solar tracking systems
The U10 model linear actuator is specially designed for solar tracking systems, and the front-end and rear-end of the linear actuator can be installed on solar panels or heliostats. The linear actuator is controlled to ensure the solar panels and heliostats face the sunlight in such a way as to allow maximum sunlight absorption and improve electric output by as much as 20%. The screw nuts are made of a copper alloy material (tin bronze and aluminum bronze) to ensure their durability. The maximum static load for this linear actuator is 4,000N, and the maximum dynamic load is 20,000N, with a waterproof class of IP66, to ensure these actuators are suitable for severe environments, feature a longer service life, and require less maintenance.

Material: certificated to UL and CE standards, pass salt mist test, lateral force test and strength test.

Third-Party Authentication: UL, CE and IP66 certification

• Voltage: 12/24/36/48V DC
• Max dynamic load: 20000N
• Max static load: 40000N
• No-load velocity:1.7~2.0mm/s
• Full-load velocity:1.3~1.5mm/s
• Duty cycle：10%
• Waterproof class：IP65
• Temperature：-25℃ ~ +65℃
• Option: Hall sensor

• The linear actuator features a large maximum load capacity and excellent reliability.
• Its shell features an excellent corrosion resistance.
• This product is waterproof, dustproof, and has an excellent resistance to salt spray, making it ideal for use in harsh environments.
• It uses a metal gearbox and features a long service life.
• This linear actuator is designed with a stable, durable structure.
• It requires very minimal maintenance and features a low energy consumption.
• The linear actuator has a self-locking function and is easy to install.
• It has three different installation methods: handle on tube, trunnion on tube, and front-rear.
• This heavy-duty linear actuator is widely used in photovoltaic industries for mounting solar trackers.

Curve graph

① Load VS Curent; ② Current (A); ③ Load (N); ④ Load VS Speed; ⑤ Speed (mm/s)

Comment: when the voltage changes from 24V to 12V, the current will be doubled.

• voltage

  1=12V
  2=24V
  3=36V
  4=48V

• installation

  1=Front-Rear
  2=Trunnion on tube
  C=customization

• rear-end

  1=rod type,Φ16mm
  2=holeΦ13.2mm
  3=holeΦ15.2mm
  4=holeΦ16.2mm
  5=clevis, slot 8.2mm, hole Φ13.2mm
  6=rod type,Φ13mm
  7=rod type,Φ20mm
  8=rod type,Φ30mm
  9=screw M16×1.5-20L
  C=customization

• front-end

  1=holeΦ13.2mm
  2 =hole Φ15.2mm
  3=holeΦ16.2mm
  4=clevis, slot 8.2mm, hole Φ13.2mm
  5=rod type,Φ13mm
  6=rod type,Φ16mm
  7=rod type,Φ20mm
  8=rod type,Φ30mm
  9=screw M16×1.5-20L
  C=customization

• Protection Class

  1=IP54
  2=IP65
  3=IP66
  C=customization

• signal feedback

  1=no
  2=Hall sensor
  C=customization

• Connector

  1=Tined leads
  2=Din 5 pin
  3=aviation plug
  C=customization

• Length of Cable

  1=1m
  2=1.5 m
  3=2m
  4=3m
  C=customization