Linear Actuators U10S

The U10S model stepper motor linear actuator is a special version of the U10 model linear actuator and is designed for use in a stepping motor. It is installed on rails and sliders to ensure precise movements. The surface anodic oxidation process is carried out to ensure a better corrosion resistance, which also extends the linear actuator’s stepper motor service life.

• Voltage: 12/24/36/48V DC
• Max dynamic load: 30000N
• Max static load: 50000N
• No-load velocity: 1.5mm/s
• Full-load velocity: 1.2mm/s
• Duty cycle：10%
• Waterproof class：IP65
• Temperature：-25℃ ~ +65℃
• Option: Hall sensor

① Load VS Curent; ② Current (A); ③ Load (N); ④ Load VS Speed; ⑤ Speed (mm/s)

Comment: when the voltage changes from 24V to 12V, the current will be doubled.

• voltage

  1=12V
  2=24V(standard)
  3=36V
  4=48V

• front-end

  1=holeΦ20mm
  2 =holeΦ30mm(standard)
  3=rod typeΦ20mm
  4=rod typeΦ30mm
  C=customization

• installation

  1=front-rear
  C=customization

• rear-end

  1=no
  2=holeΦ20mm
  3=holeΦ30mm(standard)
  4=rod type,Φ20mm
  5=rod type,Φ30mm
  C=customization

• Protection Class

  1=IP54
  2=IP65(standard)
  3=IP66
  C=customization

• signal feedback

  1=no
  2=Hall sensor
  C=customization

• Connector

  1=Tined leads(standard)
  2=Din 5 pin male
  3=Delphi pin
  C=customization

• Length of Cable

  1=1m
  2=1.5 m
  3=2m
  4=3m
  C=customization